China Electric Vehicle Axle for Bus Axle Boots Rear Axle Electric Assembly Line for Axle cv axle puller

Item Description

Design

SR55

 

 

Rated load(kg)

5500

Product

SR55

 

 

Rated load(kg)

5500

Brake Type

Disc

Max. Output Torque (Nm)

18000

Tire

245/70R19.five

Ratio

six.14

Flange Kind

Basic Flange

Wheel Hub Sort

Bearing Unit

Method Fat (kg)

210

Applicaition

11m Bus

Excess weight(oil incorporated)(kg)

132

Brake Kind

Disc

Max. Output Torque (Nm)

18000

Tire

245/70R19.five

Ratio

six.14

Flange Variety

Plain Flange

Wheel Hub Variety

Bearing Unit

Method Excess weight (kg)

1040

Applicaition

8m Faculty Bus

Bodyweight(oil included)(kg)

172

Kind: Rear Axle Assembly–Intermediate Structure                                        Type: Entrance Axle Assembly-Reduced Ground

Application: 10~14m City Bus                                                                           Application: ten~14m Coach/Metropolis Bus

Kind: Entrance Axle Assembly-Independent                                                            Type: Rear Axle Assembly–IntermediateStructure

Software: 8~10m Coach/Town Bus                                                                   Application: 8~10m Mentor/Town Bus
 

Financial system of The Axle and Suspension

In purchase to increase the axle and suspension top quality, increase buyer auto expertise, minimize soon after-income maintenance expenses, fully learn from domestic and foreign sophisticated axle technology, especially in the axle wheel edge exclusive innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free of charge axle ans suspension wheel edge, in comparison with the prior generation, there is a qualitative leap. Among them, there are 2 varieties of routine maintenance-totally free wheel edge: oil lubrication upkeep-free (usually 500,000 km servicing-free of charge) and built-in maintenance-cost-free (particularly bearing device, 5 several years / 800,000 km upkeep-totally free).

Certified Processing Line of the Axle and Suspension

Company Profile

 DUOYUAN Automobile Equipment CO.LTD

Duoyuan vehicle products, handles an area of far more than a hundred acres and has above three hundred staff, including much more than 90 professionals and technical staff, much more than 10 senior engineers, and much more than thirty intermediate engineers.

Our goal is to become the 3rd celebration specialist vehicle parts provider with modern spirit and major technology. With constant development and development for 16 a long time, we have cooperate with YuTong Group for a time period approach. Recent solution marketplace quantity: More than four hundred,000 items of bus special axles, in excess of 250,000 kits of bus air suspensions yearly manufacturing potential: a hundred,000 items of bus special axle and fifty,000 kits of bus air suspensions. In 2018, our income exceeded RMB 1.5 billion.

At present, our merchandise are mainly bus-oriented, supplying matching merchandise to complete ranges of versions this sort of as passenger bus, tourist bus, group bus, general public transportation bus, college buses and new strength bus Also, we are actively growing truck and other professional car markets. Our goods are bought to a lot more than 130 nations and areas in the world this kind of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as areas of complete car.

In buy to comprehend a better foreseeable future, we, by upholding the spirit of exploration, understand commonly from others’ sturdy points and absorb international and domestic superior knowledge, and strive for the growth of China’s automotive products.

FAQ

Q:Are you investing company or maker?

A: We are manufacturing unit who have been specializing in creating and manufacturing axle and suspension for twenty several years .
Q:Can your items be custom-made or modified?

A: We can design and develop the axl and suspension in accordance to customers’ specifications and motor vehicle parameters .
Q: What is your terms of payment ?
A: 100% Progress payment by T/T right after signing the agreement.
Q: What is your conditions of packing?
A: Normally, we set buggy axle on Picket pallets,Stretch movie mounted in picket box . Or Buyer necessary.
Q: How long is your shipping and delivery time?
A: Normally it is fifteen-twenty five times if the products are in inventory. or it is 35-forty five times if the products are not in stock, it is according to
amount.
Q: What is your axl sample policy?
A: We can provide the buggy axle sample if we have completely ready parts in stock, but the clients have to spend the sample cost and he courier value.You should speak to with me with buggy axle.
Q. Do you take a look at all your buggy axle prior to shipping?
A: Sure, we have 100% check ahead of delivery
Q: How do you make our enterprise lengthy-term and excellent relationship?
A:1. We keep axle and suspension a very good quality and competitive price to make certain our customers reward
2. We respect every buyer as our good friend and we sincerely do company and make pals with them, no make a difference where they arrive from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Model
SR55
 
 
Rated load(kg)
5500
Model
SR55
 
 
Rated load(kg)
5500
Brake Type
Disc
Max. Output Torque (Nm)
18000
Tire
245/70R19.5
Ratio
6.14
Flange Type
Plain Flange
Wheel Hub Type
Bearing Unit
System Weight (kg)
210
Applicaition
11m Bus
Weight(oil included)(kg)
132
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Model
SR55
 
 
Rated load(kg)
5500
Model
SR55
 
 
Rated load(kg)
5500
Brake Type
Disc
Max. Output Torque (Nm)
18000
Tire
245/70R19.5
Ratio
6.14
Flange Type
Plain Flange
Wheel Hub Type
Bearing Unit
System Weight (kg)
210
Applicaition
11m Bus
Weight(oil included)(kg)
132

An Axle is a Simple Machine For Amplifying Force

An axle is the central shaft that connects the drive wheels of a vehicle. It transmits power from the engine to the wheels and absorbs braking and acceleration forces. It may also contain bearings. Learn more about the important functions of the axle in your vehicle. Its simple design makes it an efficient machine for amplifying force.
Axles

An axle is a rod or shaft that connects to the drive wheels

An axle is a rod or shaft that is fixed to the drive wheels of a vehicle. It provides support and rotates with the wheels. Generally, a vehicle has two axles. However, larger vehicles can have more. The type of axle used will depend on how much torque and speed the wheels need to travel.
Drive axles are crucial to the operation of a car. They transfer power from the engine to the wheels, so they must be strong and durable. They also need to be able to support the weight of the vehicle and resist accelerated forces. The drive axle is usually connected to a driveshaft, which extends upward into the transmission and connects with the engine.
There are two main types of axles: front wheel drive (FWD) and rear wheel drive (RWD). The former type is common in passenger vehicles, while the latter type is more common for trucks and cars. The rear wheel drive (RWD) axle connects to the drive wheels, while the front-wheel drive (FWD) axle transfers power from the transaxle differential to the wheels.
Modern drive axles consist of short rods with a flexible rubber boot covering the CV joint. The rubber boot helps to prevent dirt and grease from getting into the CV joint. The increased complexity of the drive axle increases the risk that something goes wrong with it. However, this increases the car’s traction, ride quality, and handling.
A car’s axles are designed by engineers to be extremely strong. They must be able to withstand thousands of pounds of weight, while operating under high levels of friction. But no drive axle is invincible; they will break if the vehicle is overloaded or too heavy.
The rear axle is connected to the engine and rotates with the wheels. The front axle helps with steering and absorbs road shocks. Typically, this part is made of carbon steel and nickel steel.

It absorbs braking and acceleration forces

The Axle is an important part of a vehicle’s suspension. It is responsible for absorbing braking and acceleration forces. Axle roll centres are located on the transversal vertical plane, through the center of each wheel. This is the point at which lateral force applied to the sprung mass is transferred to the unsprung mass, a process known as transfer of momentum. This force coupling point is also known as the Neutral Roll Axis.
An axle’s role in a vehicle goes beyond absorbing braking and acceleration forces. It also serves as a weight transfer device, reducing the stress on the joints of a vehicle. Its design has evolved over time to meet a variety of requirements. It must be durable and able to absorb braking and acceleration forces, while providing the right amount of structural support.
A potential diagram can be used to benchmark tyre performance. The data entered can include suspension geometry and load distributions. The lateral force potential of a tyre is calculated for each individual tyre in an axle, and the values obtained for a constant steer angle are also included.
Optimal energy recovery is crucial for absorbing braking forces and meeting the total braking force required for a given deceleration. Figure 11 shows the braking forces for the front and rear axles over a certain range when j/g = m. The thick solid line ab represents this range.
In addition to braking and acceleration forces, an axle’s lateral force capacity is limited by lateral load transfer. If one axle fails to absorb lateral forces, it might break loose and skid before the other. This can lead to understeer and oversteer. This is why it is not a good idea to put unsprung weight on a vehicle’s axle.
Axles

It transmits power from the engine to the wheels

The axle is an integral part of a vehicle’s drive system. It transmits power from the engine to the wheels. Different types of axles have different roles in transmission of power from the engine to the wheels. The drive shaft is the main component of an axle, connecting the engine and the wheels.
A vehicle’s axle transmits power from the engine to the rear wheels. The power is transferred through the gears to move the car forward. The inner wheel of a bicycle pedal powers the back wheel, while the outer wheel moves at a different speed. Similarly, the power from the engine is transmitted to the wheels by a car’s crankshaft and driveshaft.
The type of axle you choose depends on the size of the vehicle and its purpose. Standard axles are suitable for most vehicles, while customized axles are best suited for high-performance vehicles. Customized axles give you more control over the wheel speed and torque. It’s important to know about the types and sizes of axles to choose the right one for your vehicle.
A differential is another vital component of the drivetrain. It allows the power from the engine to reach both wheels, which allows the vehicle to accelerate and decelerate. A differential also compensates for the difference in tyre speeds on curved roads. By using a differential, you can increase the speed of the wheels and improve your car’s handling.
The differential between the front and rear axles is called a bevel ring gear. Its input shaft is supported by a ball race mounted in the axle casing. The other part of the differential is called the input helical gear. The two sun gears are connected by cross-pins.

It is a simple machine for amplifying force

A simple machine is one that increases the output of force without altering the input force. For example, a lever increases force but does not create new energy. Therefore, it is necessary to balance the work input and output. It is important to keep in mind that friction can reduce energy.
Using a simple machine, you can perform various tasks. For example, you can use it to cut and pry apart objects. This type of machine involves a wheel and an axle, which have a smaller radius than the wedge. The force applied by the wheel pushes the two pieces apart.
Another simple machine that amplifies force is a gearbox. The earliest gearboxes were used to lift buckets or weights from wells. The large gear is attached to a smaller one by a hinge. The smaller gear increases the force of the larger one, allowing the small gear to lift much larger loads.
A wheel and axle is a simple machine that uses mechanical advantage to change force. A wheel is a circular disk, and an axle is a rod through the center. The mechanical advantage is a result of the combination of torque and angular momentum to work against the force of gravity. In addition, this machine is closely related to gears.
Simple machines are a great way to compare the magnitude of forces, as they use similar mechanisms. One of the oldest examples of a simple machine is a wheel and axle. A wheel is fixed to an axle, and the axle is fixed to a vertical surface. The force generated by the wheel will be proportional to the distance between the two spools.
Another simple machine that amplifies force is a lever. A lever uses a beam or a rigid rod that can pivot on its fulcrum. It is an effective tool for shifting heavy loads, and also for applying force. It also reduces the friction of a vehicle while preserving its momentum.
China Electric Vehicle Axle for Bus Axle Boots Rear Axle Electric Assembly Line for Axle     cv axle pullerChina Electric Vehicle Axle for Bus Axle Boots Rear Axle Electric Assembly Line for Axle     cv axle puller
editor by czh 2023-01-06